MEAN WELL HSP-200-4.2 Switching Power Supply, 4.2V 40Amps

MEAN WELL HSP-200-4.2

Features

- Universal AC input/ Full range.

- Protections: Short circuit / Overload / Over voltage

- Cooling by free air convection

- 100% full load burn-in test

- Fixed switching frequency at 77KHz 

 3-year manufacturer warranty

Specifications

Output

-DC voltage:  4.2V

-Rated current: 40V

-Current range:  0 ~ 40A

-Rated power: 168W

-Ripple and noise (max.) Note.2:  150mVp-p

-Voltage Adj. Range: 3.6 ~ 4.4V

-Voltage Tolerance Note.3:  ± 2.0%

-Line regulation: ±0.5%

-Load regulation:  ±1.0%

-Setup, Rise Time: 2000ms, 200ms/230VAC 3000ms, 200ms/115VAC at full load

-Hold up Time (Typ.): 16ms/230VAC 16ms/115VAC at full load

Input

-Voltage range (Note 4.): 90 ~ 264VAC 127 ~ 370VDC

-Frequency range: 47 ~ 63Hz

-Efficiency (Typ.): 88%

-Ac current (Typ.): 2.5A/115VAC 1.5A/230VAC

- Inrush Current (Typ.): COLD START 70A/230VAC

-Leakage Current: <1.0mA / 240VAC

Protection

Overload: 110 ~ 140% rated output power

Protection type: Hiccup mode, recovers automatically after fault condition is removed.

Over voltage: 5.75 ~ 6.75V

Protection type: Hiccup mode, recovers automatically after fault condition is removed.

Environment 

Working Temp.: -30 ~ +70 (Refer to output load derating curve)

working humidity:  20 ~ 90% RH non-condensing

Storage Temp., Humidity:  -40 ~ +85, 10 ~ 95% RH

Temp. Coefficient: ± 0.03%/ (0 ~ 60)

vibration:  10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes

Safety and EMC (note 4 )

Safety Standards:  UL1012, UL60950-1, TUV EN60950-1 approved.  

Withstand voltage:  I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC

Isolation resistance: I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC

EMI conduction and radiation: Compliance to EN55022 (CISPR22) Class B

Harmonic Current: Compliance to EN61000-3-2, -3 

EMS immunity: Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204, EN55024, light industry level, criteria A

Others 

MTBF: 1684.5K hrs min. MIL-HDBK-217F (25)

Dimension: 210*62*31mm (L*W*H)

packing: 0.52Kg; 20pcs/11.4Kg/0.76CUFT

Note 

1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature.

2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.

3. Tolerance: includes set up tolerance, line regulation and load regulation.

4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives.