ServSwitch fiber kvm extender remote unit


Price:
Sale price$6,000.00

Description

part number #II-SM 

specifications:

Cable Required:  ACS250A: 50/125-µm or (to lesser distances) 62.5/125-µm multimode duplex fiberoptic cable; ACS251A: 9/125-µm single-mode duplex fiberoptic cable 

Compliance: CE; FCC Part 15 Subpart B Class A, IC Class/classe A

Interfaces: Extension: ACS250A: Duplex multimode fiberoptic; ACS251A: Duplex single-mode fiberoptic; Video: VGA compatible (DOS mode, VGA, SVGA, XGA, SXGA); Plug-and-play for monitors and DDC not supported; Keyboard and mouse: IBM PS/2 compatible; Sound: 3.5-mm mono audio

Resolution and Refresh Rate: Supports resolutions up to 1280 x 1024 and refresh rates up to 75 Hz; maximum pixel clock (bandwidth) is 108 MHz

Optical Type and Wavelength: ACS250A: 850-nm multimode; ACS251A: 1300-nm single-mode  

Transmitter Launch Power: ACS250A: Into either 50-µm or 62.5-µm cable: From -4.5 to -9 dBm; ACS251A: Into 9-µm cable: From -3 to -9 dBm

Receiver Sensitivity: ACS250A: With 62.5-µm cable: -12.5 dBm; With 50-µm cable: -13.5 dBm; ACS251A: -14.4 dBm

Optical Budget: ACS250A: With 62.5-µm cable: 6.7 dB maximum; With 50-µm cable: 7.5 dB maximum; ACS251A: 10.5 dB maximum  

Maximum Distance: Between extender’s local and remote units: ACS250A: Over 62.5-µm cable: 720 ft. (219.5 m); Over 50-µm cable: 1310 ft. (399.3 m); ACS251A: 6.2 mi. (10 km)

User Controls: None 

Connectors: On local unit: Front-mounted: (4) 6-pin mini-DIN female: (1) for CPU’s keyboard port; (1) for CPU’s mouse port; (1) for optional local keyboard; (1) for optional local mouse; (1) HD15 female for CPU’s video port; (1) HD15 female for optional local monitor; (1) 3.5-mm stereo audio jack (~0.7 Veff/~2 Vpp) for CPU’s audio-out port; Rear-mounted: (1) Duplex SC female for fiber link (transmitter on left, receiver on right); (1) 2.1-mm barrel jack for power; (1) 8-pin mini-DIN for service (reserved for manufacturer use); On remote unit: Front-mounted: (2) 6-pin mini-DIN female: (1) for remote keyboard; (1) for remote mouse; (1) HD15 female for remote monitor; (1) 3.5-mm stereo audio jack (~0.7 Veff/~2 Vpp) for remote audio device (outputs mono on both stereo channels); On remote unit (continued): Rear-mounted: (1) Duplex SC female for fiber link (transmitter on left, receiver on right); (1) 2.1-mm barrel jack for power; (1) 8-pin mini-DIN for service (reserved for manufacturer use)

 

Indicators: (1) Front-mounted green LED on each unit: Local unit: LED is steadily lit during normal operation, flashes if unit is powered but no video signal is present at VGA input; Remote unit: LED is steadily lit during normal operation, flashes if no fiber connection is detected or local unit is outputting no signal

Temperature Tolerance: Operating: 50 to 104˚F (10 to 40˚C); Storage: 32 to 158˚F (0 to 70˚C)

Humidity Tolerance: Up to 70% noncondensing

Enclosure: Aluminum

Power: From utility-power (mains) outlet, through detachable input cord and IEC 320 male inlet to external transformer: Input: 100 to 264 VAC, 50 to 60 Hz, autosensing, at up to ~200 mA at 115 VAC or ~100 mA at 230 VAC; Output: 12 VDC at up to 2 amps (local unit draws only 1 amp maximum, remote unit only 1.1 amps); Consumption: Local unit: 14 watts maximum; Remote unit: 12 watts maximum

Size: Each unit: 2.6"H x 7.3"W x 7.1"D (6.6 x 18.5 x 18 cm)

Weight: Net, local unit: 2.4 lb. (1.1 kg); Net, remote unit: 2.2 lb. (1 kg); Shipping: Approximately 10 lb. (4.5 kg)

made in Germany .

You may also like

Recently viewed