MEAN WELL T-60-C Switching Power Supply 15Volts, 5Amps

Sale price$75.39 USD



-Universal AC input / Full range

-Protections: Short circuit / Overload / Over voltage

-Cooling by free air convection

-LED indicator for power on

-Fixed switching frequency at 50KHz

-2 years warranty



-Output number : Ch1/Ch2/Ch3

-DC voltage :  5V/15V/-15V

-Rated current : 5A/2A/0.5A

-Current range: 0.5~7A/ 0.2~3A / 0~1A

-Rated power : 62.5W

-Ripple and noise (max.) Note.2 :  100mVp-p/100mVp-p/100mVp-p 

-Voltage Adj. Range : CH1 : 4.75 ~ 5.5V

-Voltage Tolerance Note.3:  ±2.0%/±6.0%/±6.0%

-Line regulation : ± 0.5%/±1.0%/±0.5%

-Load regulation: ±1.0%/±4.0%/±1.0%

-Setup, Rise Time : 300ms, 50ms/230VAC 800ms, 50ms/115VAC at full load

-Hold up Time (Typ.) : 80ms/230VAC 10ms/115VAC at full load


-Voltage range : 85 ~ 264VAC / 120~370VDC 

-Frequency range : 47 ~ 63Hz

-Efficiency(Typ.) : 72%

-Ac current (Typ.) :  2A/115VAC 1A/230VAC

- Inrush Current (Typ.): COLD START 20A/115VAC 40A/230VAC

-Leakage Current : <3.5mA / 240VAC


Overload: 105 ~ 150% rated output power

Protection type : Hiccup mode, recovers automatically after fault condition is removed

Over voltage : 5V:5.75 ~ 6.75V

Protection type : Hiccup mode, recovers automatically after fault condition is removed


Working Temp. : -10 ~ +60 °C (refer to Output load Derating Curve )

working humidity:  20 ~ 90% RH non-condensing

Storage Temp., Humidity:  -20~ +85 °C , 10 ~ 95% RH

Temp. Coefficient  : ±0.03%/°C (0~50 °C )on +V output 

Vibration : 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes

Safety and EMC (note4)

Safety Standards :  UL1012, UL60950-1, TUV EN60950-1 approved

Withstand voltage :  I/P-O/P: 3KVAC I/P-FG: 1.5KVAC O/P-FG: 0.5KVAC

Isolation resistance : I/P-O/P, I/P-FG, O/P-FG:100M Ohms /500VDC / 25℃/ 70% RH

EMI conduction and radiation: Compliance to EN55022 (CISPR22) Class B

Harmonic current : Compliance to EN61000-3-2,-3

EMS immunity : Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204, EN55024, light industry level, criteria A


MTBF : 281.1K hrs min. MIL-HDBK-217F (25°C )

Dimension :  159*97*38 mm (L*W*H)

Packing : 0.55Kg; 24pcs/14.1Kg/0.75CUFT


1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature.

2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.

3. Tolerance : includes set up tolerance, line regulation and load regulation.

4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to perform these EMC tests, please refer to ''EMI testing of component power supplies.''

You may also like

Recently viewed